HOME Bearing Knowledge

Contact

Knowledge

Improve FAG Bearings maintenance measures


Lateral bearing block, upper middle, and housing (roller) injected oil does not enter well bearing for rolling mill, and vulnerable, a rolling mill bearing working surface is in a poor state, leading to early failure of FAG bearings.
To this end, the oil improves the bearing housings, housings inside (towards the barrel) Note additional ports to improve effect of grease, bearings are well lubricated, most mills now using grease lubrication. Due to the structure of vertical mill the roller rotates, extend the life of FAG bearings.
As specified in the host part of the request into the grease or lubricating oil;
Assembling large bearings and bearing with interference between the shaft, bore a lot of FAG bearings products have to be oil-bath heating, oil temperature at 80 degrees Celsius;
Bearing removal, you must use special tools for drawing classes, do not iron directly beat bearings;
FAG bearing Assembly and removal, and should avoid the rolling elements and cage force or deformation.

 

There is no message.
Online Messagess
Company:
Email:
Message:
ValidateCode: click refresh <--Not see, click refresh